Racing 62PR Ride-On Mower

Product Information

The Racing 6196PRRS boasts a compact 61cm cutting-width that not only makes it easy to work around and between obstacles, but also makes it possible to gain access to areas beyond narrow gateways (unusually for a ride-on mower, the Racing 6196PRRS will fit through a standard 28" garden gate). The rebuilt engine has held up great this year. Its now broken in so the synthetic oil stays almost crystal clear for a good 2-3 races.

For this build, I bought a pre-built front axle from a guy in Texas. He has a small business called " Acme mowersports" and can be found at www.acmemowersports.com. His front axles are a good deal because even if you were to build your own, the cost would be only slightly less. With the Acme axle, the proper caster and degree of inclination are already built-in, which will save you lots of time. These come with the radius arms as well as connections for the steering axle, which on mine runs down the center of the front of the mower over the top of the engine. Most mowers come with a gear driven steering setup. These are worthless and tend to pop out of place. So you'll need to make a "direct steering" system. In other words, a solid connection between the steering wheel and the front wheels.

A high-capacity 196cc (6.5hp) four-stroke overhead-valve engine - with electric-start - provides dependable, fuel-efficient power; while five-step blade-height adjustment (35-75mm) ensures there’s a setting for every eventuality. In The pic entitled: "Steering arm", you can see how this system works together. Lastly, the "turn right" pic shows the underside linkage and radius arms. If you see the "t" shaped piece, that's where the radius arms connect. The "T" is welded to the bottom of the front steering shaft. A high-capacity 196cc (6.5hp) four-stroke overhead-valve engine - with electric start - provides dependable, fuel efficient power; five-step blade-height adjustment (35-75mm) ensures there’s a setting for every eventuality.

With all of the sheetmetal painted the mower was fully assembled. Pretty nice looking if I don't mind saying so. Now there was only one thing left to do- which was to race it and see what it would do. The first race was actually what we call our "Test-n-tune" day where all the new "mowchines" are brought out and tested... and tuned up. Next, the governor is removed. You want to remove it entirely, including internally. That involves removing the oil pan. You will see a brass sleeve in which the throttle lever slides through. After you remove the throttle, use a punch to remove the brass sleeve. To seal the hole, I simply use a bolt and a nut, washer, and rubber o-ring. So, don't lose your plot - instead ready, set, mow on a ride-on lawn mower. As we've mentioned, there are petrol or battery-powered models. If it's petrol-powered take note of the engine size and fuel tank capacity. Some of these nifty machines can reach 8mph which could put pay to any lawn croquet taking place - so be careful. With battery-powered models, much like cordless lawn mowers, be aware of the battery life and charging time. In general, you should get a solid 150 minutes of mowing done before the lawn mower needs a recharge.Some mowers come with two, while others offer super-fast chargers. Mowers with the latest sensory technology can sense the load on the motor and operate at the optimum level for each task, boosting power for long/damp grass and extending battery run time during lighter cutting tasks. What is cutting width?