Brasso Metal Polish, 175 ml

Product Information

This cleaner also uses ingredients that are found in the majority of households: white vinegar, salt, and flour. In 2010, Brasso brought out a new product, Brasso Gadgetcare. Gadgetcare is a versatile, non-abrasive gel that can be used on everything from LCD TV screens, laptop screens, computers, smart phones and PDAs. The plastic bottle is 50ml and is sold with a microfibre cloth. When disposing of Brasso, make sure to follow the proper waste disposal guidelines in your area. Avoid pouring Brasso down the drain or throwing it in regular household trash, as it can be harmful to the environment. Always have antique brass cleaned professionally to avoid damage to the original surface. The most you should do at home is dust it with a microfibre cloth. Flour/Vinegar Paste: Mix one teaspoon of salt into a 1/2 cup of vinegar. Add flour until the liquid becomes a paste and spread over the brass. Let the mixture sit for up an hour then rinse and buff the piece. Does Brasso damage plastic?

Since Brasso contains chemicals, it’s recommended to wear protective gloves while using it. This will help protect your skin from any potential irritation or harm. 4. Apply Brasso to a Soft Cloth Brasso has been used by watch enthusiasts to polish scratches out of acrylic crystals on watches. [12]Regularly wipe/buff the already treated areas with an additional clean cloth to see how you’re polishing exercise is going.

Still, we recommend testing your chosen method on an inconspicuous patch of the object first to ensure you don’t damage the surface. If the surface is heavily tarnished or dirty, you may need to repeat the process to achieve the desired results. Be patient and take your time to ensure that the surface is thoroughly cleaned and polished. 7. Maintain shine This may come as a surprise, but toothpaste makes an excellent brass cleaner when used correctly. This is because toothpaste is mildly abrasive, allowing it to gently scrub away the tarnished metal.Always wear gloves and a mask– Brasso can cause skin irritation and inhaling the fumes may lead to drowsiness. If you do have Brasso residue leftover, either keep buffing it off the surface or use a clean cloth to remove it. Keep an eye out for a blue and white striped pot that has a big red label on the front, with the name ‘Brasso’ on it.

Remember to test a small, inconspicuous area before applying Brasso to the entire surface and always follow the manufacturer’s instructions for best results. Effective Tips for Cleaning with Brasso Brasso, if used correctly, will naturally be worked into a surface, and any residue will be buffed away by a clean cloth at the end of the exercise. By following these effective tips for cleaning with Brasso, you can ensure that your surfaces are kept clean, shiny, and well-maintained for years to come. Advanced Techniques for Cleaning with Brasso 1. Removing Stubborn Stains If you buy a liquid can of Brasso, you need to pour a small amount of the can’s contents onto a clean cloth to use the solution.Mix the ingredients in a small bowl. Stir thoroughly to ensure the ingredients are mixed. Add the solution to the cleaner. Add your brass pieces and turn on. Allow the cleaner to run for at least fifteen minutes. Remove the brass from the ultrasonic cleaner and dry with a clean, soft cloth. How Can I Protect My Brass from Tarnishing? Church, Roy A.; Andrew Godley (2003). The Emergence of Modern Marketing. Routledge. p.30. ISBN 0-7146-5390-X.

Over time, even the shiniest brass gets tarnished, dirty and dingy. In many cases, simple household products such as vinegar and salt can clean brass. They’re a safe and inexpensive alternative to commercial cleaners. How do you keep brass shiny? With Brasso, even the most tarnished and dull metal surfaces can be transformed into radiant, gleaming treasures.” The Basics of Cleaning with Brasso Brasso has been successfully used to take minor (white) heat marks out of French polished wooden surfaces. The fine abrasive cuts through the surface and allows the solvent into the wax and lacquer layer. The surface should be properly cleaned and waxed after this treatment. The label of Australian Brasso lists "Liquid Hydrocarbons 630g/L; Ammonia 5g/L", whereas the material safety data sheet for Brasso in North America lists: isopropyl alcohol 3–5%, ammonia 5–10%, silica powder 15–20% and oxalic acid 0–3% as the ingredients. [4] However, the Australian version contains kaolin instead of silica for abrasives. [5]

How Do You Remove Dried Brasso Residue?

Using a clean cloth, start polishing the surface in a circular motion. Apply gentle pressure and continue polishing until you see the desired shine. If the cloth becomes dirty or starts to lose its effectiveness, switch to a clean cloth or fold it to a clean area. 5. Remove excess Brasso Gently rub the stained area using circular motions. Apply light pressure to avoid scratching the surface. Brasso is not recommended for use on wooden surfaces, as it may damage or stain the wood. It is best to use specialized wood cleaners and polishes for cleaning and maintaining wooden surfaces. 6. Other Surfaces The online data sheet for Brasso wadding in the UK lists the ingredients as C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, C14–18 and C16–18 unsaturated Fatty acids, Kaolinite, Aqua, Ammonium Hydroxide and Iron Hydroxide. Brasso liquid lists a slightly different mix; C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, Kaolin, C12–20 Saturated and Unsaturated Monobasic Fatty Acids, Aqua and Ammonium Hydroxide. Also available are ingredients in a discontinued recipe for Brasso. Wadding: C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, Ammonium Tallate and Colorant. Liquid: C8–10 Alkane/Cycloalkane/Aromatic Hydrocarbons, Quartz, Kaolin and Ammonium Tallate. [6] Cleaning tarnished brass often requires a bit of elbow grease, even when using one of our recommended cleaners.