HG Cement Grout Film Remover 11, Removes Grouting Residue from Non-Porous Ceramic Tiles & Flagstones – 1L (101100106)

Product Information

Repeat the process if necessary, if using the cleaner indoors ensure good ventilation during and after use. If you have tiles made of stone, never use an acid-based cleaner on the tiles as this can damage or stain them. Apply the solution generously with a paint brush or sponge onto the affected areas of the ceramic or porcelain tiles, allowing the solution to dwell for a 5 to 10 minutes. We also sell a range of fast set, flowable concrete that is ideal for setting or repairing steps, kerbs, fence posts, mailbox posts, decking posts, lamp posts, and ideal for setting equipment such as playground furniture. Pre-wet the stone surface, apply generously and allow the product to dwell for 5-10 minutes before agitating with a scrub pad or similar and rinsing off with plenty of clean water.

uk accepts no liability for inaccuracies or misstatements about products by manufacturers or other third parties. StoneCare4U supply a range of professional grade natural stone cleaners and sealers, as well as specialist formulas for the treatment and repair of natural stone, internal floors, block paving, roofing, tarmac, masonry and brickwork. If required, use as a grout residue remover in conjunction with Grout Cleaner and Mould and Mildew Remover.Always test Stonecare4u's Essential Grout Haze Cleaner on an inconspicuous area before usage, and try to avoid splashes on sensitive surfaces. Our Remove-It Grout Haze Remover is perfect for removing grout, plaster, and builders’ dirt from ceramic and porcelain, especially useful after the flags have been installed. You can create such a beautiful effect in your home and it’s really not that hard once you get started! Instead, clean the grout haze as soon as the installation is done, as the grout haze will be harder to remove on stone tiles if it dries overnight.

There are 3 types of grout–cement, ready-mixed, and epoxy–resulting in different types of grout haze. Lithofin Power Clean paving grout cleaner can be used neat or diluted at a ratio of up to 1 in 10, then evenly distribute and wipe the surface.It’s certainly a proud moment, but one that can quickly be marred by that thin white film now coating your tiles. Dependent on degree of contamination, Universeal Grout Haze Remover can be used neat or diluted up to 1:10 with clean water. Agitate the surface of the paving with a stiff brush or course tilers’ sponge and leave to act for at least 10 minutes. If you have epoxy grout haze, you will need to try a professional cleaner to ensure you do not damage the grout or the tiles.

Use our solutions in combination with our Macchia and Ventosa to achieve a quicker application and maximum results.Depending on the level of soiling, dilute Grout Haze Remover to the correct dilution rates with either hot or cold clean water. Normally works like a charm however, this cheaper light gray tile has been killing me with the haze I will try the baby wipes! StoneCare4u Essential Grout Haze Cleaner (1 Litre) can be used indoors and outdoors after the installation process or during construction. Before using a cleaning solution, we’d always suggest applying an amount to a small area, to get the strength right.