About this deal
Please Note: This information is for guidance only, the above table is to be used as an estimate of the amount of EASYJoint required, we always recommend purchasing an additional 1-2 tubs to ensure that you have enough – it will also keep due to the unlimited shelf life. Yes, theoretically EASYJoint can be used below 3 degrees down to freezing conditions, however in these conditions, the use of lots of water becomes more difficult with a greater risk of staining. Where possible avoid using below 3 degrees, use with caution. Does EASYJoint stain paving slabs? No Waste: Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water. – There is no waste with our jointing compound, EASYJoint is an environmentally friendly product. Wet the Paving. Thoroughly soak the patio or paved area to be jointed with lots of water using a hose. The paving must be absolutely saturated before starting and remain soaked throughout the application process ‘the wetter, the better.’ We strongly recommend not shortcutting this process, particularly when working with absorbent or sensitive materials such as Sandstone, Granite and Limestone. Highly absorbent and porous stone will require sealing, 2-3 days prior to laying, on its top surface and four edges. Suitable for Light Vehicular Use On Dense Grade Projects. (For permeable driveway installs Refer to EASYJoint Pro)
With thin paving it is difficult to achieve 25mm depth. To achieve it, create a channel in the base material by running the tip of a trowel around the exposed edges of each paver to create 25mm depth for EASYJoint to sit in (see illustration above). CHAMFERED PAVING (Paving with ‘V’ Joints) We cannot overly stress how important it is to use plenty of water before, during and after the application of EASY Joint. A hose with a fan type nozzle is perfect. Does EASYJoint stain sensitive & porous paving slabs?The calculator automatically updates with the required amount based on the quantity of paving you have inserted in the spec-chart. The same rules apply when working with porcelain paving tiles as with working with stone or concrete. The base on which the porcelain is laid MUST BE PERMEABLE. EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example.
Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe. Apply a final rinse of water across the surface to wash off any EASY Joint residue and to aid the final compaction process. EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water.If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process. You can be sure that provided the EASYJoint instructions are followed you will have a solid joint that will last for years EASYJoint results in a strong paving joint that withstands the elements, and lasts for years, what’s more the solid joint eliminates weed growth! EASYJoint brush in paving grout can be used whatever the conditions are, it’s suitable to be used in wet and rainy weather. Freezing weather will increase the set time and will cause the process to virtually stop, it can take many days for the joints to set fully hard. However EASYJoint will eventually set and the weather conditions will not have impaired its integrity in any way. In dry conditions and warm to moderate temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure very hard within a few days. Cold and wet conditions increase the setting time considerably. Freezing weather will cause the process to virtually cease and it can take many days for the joints to set hard. However EASYJoint will eventually set and the weather conditions will not have impaired its integrity in any way.
EASYJoint is the UKs top selling paving jointing compound, favoured by professionals and DIY installers all around the world. Overall EASYJoint seems like a good option. It works exactly like it says on the tin and with proper application, there is very little that can go wrong. However, there does seem to be a small issue with production where around 10-20% of the tubs have already set before being opened. Joint-IT Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes If you are looking for a non-staining grout for your newly laid patio or driveway, then why not choose Joint-IT? It is a product that is easy to use and will maintain the integrity of your beautiful natural stone or cobbled area. The great thing about Joint-IT products is that they are expert hardscape products. They offer the best possible combination of advanced technological formulations and environmentally friendly raw materials. All while promising a strong and effect solution for your paving needs.Zero Waste – Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2″ (50mm) or more of water Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings. For the DIY user of EASYJoint it means that you do the work, the jointing of the paving, when you planned to. For the professional user of EASYJoint, it improves cash flow– get the paving job done and get paid without delay EASYJoint brush-in patio grout , is a really simple, fast and DIY friendly way to fill the joints in paving slabs and flagstones. Market-leading EASYJoint is ideal for all types of paving such as natural stone, limestone, porcelain, sandstone, Yorkstone, Indian Stone, granite setts and concrete flags.
Using small quantities of EASYJoint, simultaneously spread and wash the compound across the surface using a light jet of water and a broom/squeegee, allowing it to fall into the joints For a project to be free draining, both the bedding and sub-base must be permeable. To achieve this, assuming a permeable sub-base, where a mortar bedding is used it should be no stronger than 6 parts sand to 1 part cement (6:1). This will ensure good drainage and is perfectly adequate for pedestrian areas. If water is retained in the joint for long periods, rather than passing through, the joint may fail. Weather Conditions EASYJoint is the original sweep-in all-weather jointing compound and still the best truly "All Weather Paving Joint Compound". Do not be fooled by other paving jointing compounds making similar claims. Azpects sells tens of thousands of tubs of EASYJoint every month to satisfied customers all over the Europe and North America. Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes EASYJoint grout is ideal for all types of paving such as natural stone, granite setts and concrete flags providing there is a gap of at least 3mm wide and 25mm deep. This simple to use, brush in grout provides a strong joint and prevents weed growth! EASYJoint can also be used in all weathers!A single 12.5Kg Tub of EASYJoint will cover approximately the following areas of paving* Paving Size (mm) Ideal for use with natural stone, limestone, porcelain, Yorkstone, Indian Stone, granite setts and concrete paving slabs Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2″ (50mm) or more of water. – There is no waste with our jointing compound, EASYJoint is an environmentally friendly product.